|
Агрегат отопительный АО 24-290 |
|
|
There are no translations available
Агрегат отопительный АО 24-290 с пониженным уровнем шума.
Для создания тяги агрегат оснащен осевыми вентиляторами, которые при наличии автоматики, могут включаться при определенной температуре теплоносителя. Воздух, проходящий через агрегат, не должен содержать липких веществ и волокнистых материалов, пыли и взрывоопасных газов. Агрегат так же может быть использован для воздушного отопления (в том числе дежурного отопления) производственных помещений категорий Г и Д по СНиП 2.09.02 – 85. Агрегат должен эксплуатироваться в макроклиматических районах с умеренным климатом (У3) категории размещения 3 по ГОСТ 15150.Температура теплоносителя не выше 180ºС и давление не более 1,2МПа.
|
|
|
Heating unit |
|
Function of the product
The heating unit heats air using the heat of hot or superheater water supplied from the external heat supply sources and is designed for air heating (including also background heating) of industrial buildings of category G and D according to SNiP 2.09.02-85, where the industrial process does not involve release of dust or explosive gases. Theair should be free of adhesive substances and fibrous materials.
The unit should be used in macroclimatic regions with moderate and cold climate (UHL) and allocation category 3 according to GOST 15150. Heat carrier temperature is not more than 180°C and pressure is not more than 1.2 MPa.
|
|
Read more...
|
|
|
Air supply unit AVP |
|
|
Air supply unit AVP
|
 |
Function of the product
Air supply unit AVP heats air using the heat of hot water (heat carrier) supplied from external heat supply sources and is designed for heating and transferring air in air handling plants, warm air curtains, return air plants for heating rooms of industrial and agricultural application.
The use of centrifugal fan allows using the unit in input systems of ventilation and gate air curtains
The unit is equipped with calorifer KSk, produced by our plant.
Air shall comply with maximum permissible content of deleterious substances according to GOST 12.1.005-88 with dust level not more than 0.5 mg/m3 and free of adhesive substances and fibrous materials.
The unit should be used in climatic regions with modrrate and cold climate (UHL) and allocation category 3 according to GOST 15150.
Heat carrier temperature is not more than 180°C and pressure not more than 1.2 MPa.
|
|
|
Read more...
|
|
|
Electric air heater installation |
|
|
Electric air heater installation
|
|
Operating principle
Electric calorifer installation (EKU) is designed for heating rooms of industrial and agricultural application, and are used in construction industry for drying plasterwork, construction materials, paint and creating comfort conditions for completing works. The operating installation creates difference of temperature of inlet and outlet air from +35 deg. C to +65 deg. C , enabling to use it for inlet ventilation and heating in recirculation mode. If required, in warm season the installation can be used as a high-capacity fan by switching the electric calorifer off; and decrease temperature difference of inlet and outlet air by switching EKU sections off. The unit is used for indoor applications at ambient temperature from -20°C to +40°C, in atmosphere free of highly inflammable substances and dust.
The electric air heater installation consists of an electric air heater, axial fan VO-06-300; it can be installed on a platform or suspended on supports.
|
|
|
Read more...
|
|
|
|
